iMac Thin red vertical line halfway on 27" display (Mid 2010)

Question

iMac Intel 27" EMC 2390

모델 A1312 / Mid 2010 / 3.2 GHz Core i3 또는 2.8 & 3.6 GHz Core i5 또는 2.93 GHz Core i7, ID iMac11,3

382 질문 전체 보기

Steve @steve22067

평판: 1

게시일: 2018년 10월 6일

옵션

iMac Thin red vertical line halfway on 27" display (Mid 2010)

Hi,

Has anybody experienced anything similar? The Red line appeared not too long ago - doesn’t go all the way like in other cases I have seen. Red, quite thin just above halfway up - most visible on dark backgrounds, less so on others.

pics here:

https://imgur.com/a/St98sc8

Mid 2010 A1312 (EMC 2390)

2.8 GHz Core i5 (I5-760)

16gb ram

Currently installed High Sierra.

The graphics card is Radeon HD 5750 - has been fine up until this appeared. No line on external display.

Any advice or direction for research is appreciated. Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 2개

Did you open your system or have the system serviced?

Dan 의 2018년 10월 6일

Just for the ram upgrade and HDD/SSD

Steve 의 2018년 10월 6일

댓글 달기

답변 1개

Dan @danj 평판: 479.4k Self employed contract worker 35 329 971 · Answer 1 · 2018-10-06T04:10:34-07:00

가장 유용한 답변

Dan @danj

평판: 479.4k

Self employed contract worker

35

329

971

게시일: 2018년 10월 6일

옵션

As you state the external display doesn’t show it we can surmise the issue is within the internal display assembly not the GPU logic. The OS level won’t be a factor either.

Here’s the IFIXIT guide to replace the display: iMac Intel 27" EMC 2390 Display Replacement and here’s the needed part [연계 제품이 누락 또는 비활성화 됨: IF174-034]

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks for the help. I think I won’t bother with changing the LCD as it’s not worth the money I think at this point. Good to know though, hopefully it won’t get worse.

Steve 의 2018년 10월 6일

댓글 달기

iMac Intel 27" EMC 2390

iMac Thin red vertical line halfway on 27" display (Mid 2010)

답변 1개

귀하의 답변을 추가하세요