기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

옵션

iPhone 6 Home Button Connection Issue

After replacement of iPhone 6 Home Button with a iFixIt replacement part the Home Button and Touch ID work after connecting all plugs to the mainboard. But after assembly of the upper metal bracket to fix the plugs to the mainboard, the home button does not work anymore. After trying some times I luckily found a position where it worked with assembled bracket. Happily I put everything together but after some hours its lost the connection again. I’m not sure where to search for the mistake. Lower plug connection and Home Button itself seem to be working fine, the problem seems to be somewhere in the upper connection area .

Any suggestions?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Sounds like theres something wrong with connector, the easiest way to diagnose it is to replace the ribbon (the one attached to display shield) as they’re siper cheap if the problem wont go then it’d be the connector on board and to replace that you’d need hot air station, ideally microscope and lots of skill.

you can also grab a magnifying glass and check the on board connector for debris before replacing the ribbon.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

W3llenreiter 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 44