평판: 1
1
I replaced my lightning connector yesterday with new part; everything seems to work except for the headphone jack. The phone recognizes that there’s a headphone plugged in, and the controls work, but no sound comes out.
Even the mic works, so not sure if it’s a bad part or if there’s a bad connections somewhere; any help would be greatly appreciated!
좋은 질문 입니까?
평판: 1
1
Solved; ended up being just a defective part; replaced with new component and everything works!
해당 답변은 도움이 되었습니까?
평판: 1.2k
4
1
5
Make sure connection on board side is getting full contacts it will only take 1pin to stop headphones from working.
If after you are encountering the same problem i would swap back your old port temporarily not need to remove full flex just click it in and test headphones.
This will allow you to determine if you have a faulty item.
해당 답변은 도움이 되었습니까?
Tried old connector as recommended. The old one works, but the new part doesn't. I'll request a replacement part from ifixit parts shop. Thanks!
That's great glad to see you worked it out
평판: 278
7
1
Maybe check if you soldered it in right,you may of messed up and this is why it does not work.
해당 답변은 도움이 되었습니까?
24 시간 전: 1
7일 전: 8
30일 전: 11
전체 시간: 181
