Skip to main content

Apple's 6th revision to the iPod Touch lineup, released in July 2015.

103 질문 전체 보기

Why won't my screen click back in place?

Hi, I replaced the battery on my daughter’s ipod touch, 6th gen but  I haven’t been able to get the LCD screen back on the unit.  I actually ended up breaking the bezel after trying for hours to get it back on.  All of the videos I've seen show that it doesn’t take much force.  I followed the directions to a tee but I think the head of a screw might be too proud.  I may not have put the screws exactly back in their original position.  I think I noticed a couple of screws were slightly longer than the majority.

Thanks,

Paul

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

1개의 답변

선택된 해법

Everytime I work on an iPod Touch 5/6, I always swear it will be the last one ;>). They can be frustratingly difficult to work with and the screens are so brittle and fragile that they will break under the slightest stress.

It’s very important to get the right screws in the right place and insure they are properly seated (but not over-torqued). Because you replaced the battery, you had to take all the guts out and its possible that something isn’t seating properly and causing obstruction. Take a break, regroup and try it again, this time by dis-assembling everything and looking for proper fit.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

paul 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 12