I need to replace my blend door actuator so my heat will work. Ive asked mechanics and the all tell me that the dash has to be removed but youtube tells me its on the driver side and can be replaced with out removing dash..please tell me this is true
좋은 질문 입니까?
평판: 13
1
The actuator that controls heat/cooling is located in the area just above the driver's right foot. To access, pull down the panel below the steering wheel, then slide it to the left. It will come off. Then you can see the actuator. There are two. The lower actuator controls the heat/cooling. It has two t20 screws. Very easy to access, remove, replace. The upper actuator controls the direction of airflow (feet, face, defrost). It's upper screw is more difficult to access.
해당 답변은 도움이 되었습니까?
Pls the circulation and A/c light is not coming up in my liberty Jeep 2008 what could be the problem
24 시간 전: 8
7일 전: 34
30일 전: 122
전체 시간: 2,636
12 
8