주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

4028 질문 전체 보기

Cant replace screen! help

I was replacing my current old lcd with my new one but when it came to putting the metal shield on i could unscrew two and the others would not unscrew how can i solve this? i tried everything i was making my self sick cause i felt like i was about to lose my phone

!! can i cut the two tabs off? please help!

Update!

i bent the tabs in just a little to fit the frame but is there anything else i can do instead of this everything worked but my screen wouldnt close all the way

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

답변 3개

Cutting those two tabs off is not a good idea. The screws used are PH000. If you could provide some photos of the part you are stuck on, that would be helpful for determining your issue.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

what will happen if i do? any screen damage? i used a phillip screw driver and no results its like its too tight

Ensure you use a PH000 driver, as you can strip the screws if you are not careful. The frame will not seat properly, and you can cause damage to the display.

의견 추가하세요

If you’re talking about the side-frame screws that hold the LCD shield in place the can be snapped off carefully. Is it ideal? No, but it can be done. Or you can purchase another backplate and be done with it.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

the screws on the side of the metal shield

의견 추가하세요

Did you strip the screws that hold the shield in place? If so, I did one time, and just dremeled the heads off the screws not hurting the shield, then replacing the screws. You don’t want to cut those tabs, but only if you are going to replace the shield.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

no i didnt strip them

make sure you have the right screw driver, and if you , try not to be afraid of giving it some more power. If it doesn't come loose, you may have to dremel the heads off the screws to remove the screws. Only issue is, you'll need replacement screws.

의견 추가하세요

귀하의 답변을 추가하십시오

ios user 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 61