기기를 수리하세요 커뮤니티 상점

2010년 중반기 모델 A1278 / 2.4 or 2.66 GHz Core 2 Duo 프로세서

795 질문 전체 보기

옵션

Replaced trackpad only works when touching laptop body?!?

I recently replaced the trackpad (and mounting brackets) on my MBP, as it had been damaged by a swollen battery.

I thought the new trackpad was faulty, but it turns out that it works fine, as long as I am touching the laptop body! I assume this is an issue with electrostatic charge or similar, so that by touching the rest of the laptop I am somehow completing a circuit?

When I'm not touching the laptop (so that the only contact is with the trackpad) the cursor behaves erratically, but as soon as I touch the aluminium body it works perfectly. Do I need to somehow ground or earth the component?

Any advice greatly appreciated, please!!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Is the flex cable Ok? Are completely you sure you attached the flex cable correctly after mounting the new trackpad?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 3개:

The flex cable was fine, so I reused it. It seemed to be attached correctly - I followed the video tutorial as closely as I could. If it works perfectly when I touch the laptop case, I wouldn't have thought that could be the cause…?

의

OK, so - slight update. Having gone back inside the casing and checked the flex cable, that is fine too. However...when the power supply is removed (i.e. the laptop is working off the battery), the trackpad works fine!!! So it only really jumps around and starts to become unresponsive when it is plugged in to the power and I am not touching the laptop casing elsewhere. I now feel it's something to do with grounding and the power supply...

의

Hey any news about this? I'm getting the same exact problem!

의

댓글 달기

귀하의 답변을 추가하세요

Philip O'Donnell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 4

전체 시간: 123