주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Post battery replacement charging problem

Hello, I replaced the battery in an IPhone 6S last night. I followed the instructions by discharging below 10% and charged the phone overnight. The level of charge displayed never got above 28% now it seems to jump up and down and the phone resets itself frequently.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

By seeing this might be battery not properly connected on battery connector.Check it first if the problem still same try to replace battery with new one.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I've checked the connector again. It seem to be firmly snapped into place. If this is a defective battery how does ifixit handle that.

댓글 달기

I suppose you did everything the right way? You did shut down the iPhone before opening it and getting in there with a screwdriver?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Thanks for the suggestions. It was a faulty battery. I was able to install the original one as a stop gap until I get a replacement. It wasn’t holding a charge well before the replacement but it’s functional.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

tyheel17 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 47