주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2693 질문 전체 보기

Digitizer doesn’t work after replacement. Need to restart to work

I can use iphone for a few minutes. Then when I inlock it I need to restart it, sometimes. Otherwise the screen won’t respond. The problem only appeared after a screen change. How do I solve it? Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Try reseating the connectors in place again, maybe they are slightly misplaced. Don’t forget to disconnect the battery before removing the screen. If that doesn’t help you might have a glitchy screen.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기
가장 유용한 답변

It sounds like a bad screen to me. Was it replaced at a repair shop? If yes take it back to them for warranty on the screen.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

alexisylucho 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 39