평판: 1
1
Hi there,
I have a iPhone 6 that is having a no sound issue as well as is unrecognizable by a computer. The phone does not output sound even when it has headphones plugged in.
I have tried software reset. I have no idea but is it possibly the small audio ic? tristar? Tigris? I have no idea… Hoping someone might have some insight. Trying to break into board level repairs… please take it easy…
Thanks in advance.
좋은 질문 입니까?
평판: 169
4
1
The problem is your charge port, try to change your charge port, thats why you have no audio output on speaker and headphone jack because charging port is 1 modular part connection.
해당 답변은 도움이 되었습니까?
This is not the issue. Have swapped it 3 times no luck. Thanks though! I should've added it to the list ...
just check your charge port connection into the board make sure its clean or your pin is not damage, its nice to give more conclusion if you add image of your board.
I agree it's most likely either a bad charging port connector on the logic board or something up with the charging and audio circuit going bad possibly from liquid damage.
There does not seem to be any visible issue with the connector on the board. Could it still be damaged? Not really sure where to turn at this point.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 51
