주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2264 질문 전체 보기

After succecfull screen replacement, iPhone is not working.

Installed new screen, instead of broken on iphone 7. It was working for two days, suddenly it started rebooting and now it is not working at all. Itunes dont see it, pushin vibration button there is no vibration. What it could be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

You might want to open the phone again to double-check your connectors (battery, LCD, lightning dock connector, front camera flex). How was this phone damaged originally? Drop damage? Liquid damage? Run over with your car? Depending on what happened, you might have more damage to repair than just your damaged screen.

I’d start with simply checking your connections. Open the phone and disconnect the battery first. Carefully lift the connectors and reseat them to ensure they all have a solid connection to the logic board.

Without additional information or some diagnostic tools on your part, it’s difficult to say what the problem could be. Since you have already opened the phone to perform the screen replacement, the likely place to start troubleshooting is to go back and check your work.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Before I replaced screen, phone fell out of pocket and glass was broken, but the screen was working perfectly.

After the problem appeared (phone is not working), I dissasembled it again and checked all the connectors, but it did not solve the problem. Later, I put old screen with broken glass, it did not help again...

댓글 달기

귀하의 답변을 추가하세요

d1m4chas 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 34