주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1972 질문 전체 보기
질문 마감됨

Lock Button Repair Button Button goes in too far

I just purchased a new housing for the phone. I was reassembling it and found that there seems to be too much space between the lock button and the actual foil switch. I replaced the headphone jack as well. so that part is new. My friend gave me the phone and when I got the phone apart the flex cable was severed. Its not impossible that the bezel is bent, but I did try to bend it a bit to bring the flex cable closer to the external switch but it seemed not to have helped. What can i be doing wrong?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

when you buy an original iphone there is glue holding it together (the bezel and the housing). if you replaced the housing there is no more glue. try pressing 2 fingers, one on the camera and one directly on the other side the button should pop out enough to be able to push.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 467