메인 콘텐츠로 스킵하기

2.2, 2.4, 2.5, 또는 2.6 GHz Core 2 Duo 프로세서

964 질문 전체 보기

Inverter or Inverter Cable?

My MacBook Pro 2.2 Intel Core 2 Duo A1226 (santa rosa) fell from the desk landing on its side while open. The screen went dim. I could faintly see the desktop. I plugged in external monitor used fn/F7 to mirror monitors and was relieved to find everything still fully operational except the screen. I researched your pages and have come to the conclusion it is either the inverter or inverter cable. What should my next diagnostic move be? I know the info was probably right in front of me and I am grateful for that. Could you please just clearly guide me with an "idiots" step by step how to proceed? Thank You.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

댓글:

So can somebody tell me what exactly I need then? My isight is working fine. I can barely see the faint image of the desktop on screen. It is not illuminated at all. Does this rule out the cable? Please advise. Thanks Again!

의 답변

So can somebody tell me what exactly I need then? My isight is working fine. I can barely see the faint image of the desktop on screen. It is not illuminated at all. Does this rule out the cable? Please advise. Thanks Again!

의 답변

의견 추가하세요

3개의 답변

선택된 해법

i would like to know as well, i am experiencing the same issue...

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요
가장 유용한 답변

Sounds like an inverter problem to me. I would open it an reconnect the inverter plugs. That failing, replace both the inverter and wires.

Here's the part: MacBook Pro 15" (Models A1226/A1260) LED Driver Board

Here's how to get to it: MacBook Pro 15" Core 2 Duo Models A1226 and A1260 LED Driver Board Replacement

MacBook Pro 15" (Models A1226/A1260) LED Driver Board 이미지

상품

MacBook Pro 15" (Models A1226/A1260) LED Driver Board

$44.99

해당 답변은 도움이 되었습니까?

점수 4

댓글:

thank you mayer!!

의 답변

의견 추가하세요

the part he is showing is not the LED driver board. That board combines the voltages from the led driver on the left side of the mlb, and the voltage from the lvds cable on the other side. It combines the voltages so that the lcd see's one voltage coming in. LED displays do no use inverters. I've repaired Mac's for close to 10 years and never seen that part go bad. The only MBP model that used an inverter was the original macbook pro.

Update

the part exists, but they are calling it the LED driver and its not. In fact, if you really want I'll show you the logic board schematic proving it. WHen they do teardowns they are guessing what things do, they are not engineers. That is a DC-DC board that allows the voltage to the LCD to come down one line and transmit ROM data to the LCD.

I will contact ifixit, but please explain to me how an LED display could use an inverter? Inverters are designed to deliver high voltage in a controlled manner.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

pjhildebrand1 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 4,613