해결됨: Detects internal speaker in System Preferences but no sound - Mac Pro Late 2013

Detects internal speaker in System Preferences but no sound

No boot sound and no sound when in OS (10.14.3). System Preferences shows that the internal speaker is there. I can plug in headphones and the output source changes to headphones and sound does play through them. I've replaced the speaker, I/O Board, and cable that connects I/O Board to logic board. I've tried resetting SMC and PRAM. I've booted to a live Linux USB and sound doesn't work there either. I've run out of ideas besides replacing Logic board and/or CPU riser board. Thanks for the help.

댓글 2개

What does the Sound control panel show as far as Output?

Dan 의 2019년 4월 16일

Internal Speakers

undrgrndneo 의 2019년 4월 16일

게시일: 2019년 4월 16일

옵션

Did you replace the Port board? It has the DAC chip (Cirrus) on the same side as the speaker. I’m suspecting the one of the trace lines going to it from the speaker is your problem. Check the solder joints on the chip and the surrounding area. Trace the speaker connection to the DAC

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 2개:

By port board do you mean the board the speaker plugs into? If so then yes it's been replaced. I could look at the DAC chip I suppose but I don't have a reflow station if that is the issue.

undrgrndneo 의 2019년 4월 16일

Yes, the speaker ties to the DAC so either the connection at the speaker or the solder joints on the DAC and the SMD around it had an issue.

Also you might want to double check the speaker I think its a 4 Ohm unit.

Dan 의 2019년 4월 16일

댓글 달기

Mac Pro Late 2013

Detects internal speaker in System Preferences but no sound

답변 1개

귀하의 답변을 추가하세요