주요 콘텐츠로 건너뛰기
수리 커뮤니티 가입 - 계정 만들기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

Home Button Very Weird Problem :@

Hi, I have restored my iPhone 3Gs using DFU mode and the home button is working fine (also done a soft reset and the button works fine), but now when I use the phone properly in the iOS the home button does not work at all, so the home button only works when doing restores in DFU and soft resets, rather strange.

When doing restarts or putting the phone in DFU I never had the two prongs connected to the charge dock, is there a different circuit for restarts and DFU modes?

any ideas what it could be?

Thanks Chris

iOS 4.3.3

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 -1
댓글 달기

답변 2개

가장 유용한 답변

Turn iPhone off, and carefully reseat Flex Cable #4 (the Dock Connector Flex Cable). Probably the right most Flex pins are not seated all the way down to make contact with the Logic Board Connector. Seat it down all the way.

이 답변이 도움이 되었나요?

점수 1

댓글 1개:

Thanks for the help, still no success, I tried removing cable 4 from the logic/b, and then soft resetting to see if the home button still worked and it did, do you know are there two different connections to the logic/b one for system (soft reset/DFU and one for phone function

Thanks Chris

댓글 달기

I am also having the same problem. It is very frustrating and I cannot figure it out...also, volume up botton does not work but volume down button does. What could be the problem here?

이 답변이 도움이 되었나요?

점수 0
댓글 달기

답변을 추가하세요

Chris Moss 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 447