해결됨: How to test a water damaged 6S - test points - iPhone 6s

How to test a water damaged 6S - test points

So I have a 6S which has been totally submerged In water and unfortunately the person did try to turn the phone back on, and did not do anything special to try to get the moisture out. I have looked at all, or at least in all the places which I could access with a microscope and no components seems to have any obvious damage to me, except maybe U5411_RF and / or C5403_RF, but thats a maybe ?

I have cleaned the motherboard in alcohol.

Anyway, the phone does not boot up and does not respond at all when powering the phone from either a battery or with a charger.

So where could I start measuring, at which components and places would be suitable to start testing?

게시일: 2019년 5월 14일

옵션

Firstly I would check for a vcc main short. It most likely will have one. How you track it down depends on what tools you have. Freeze spray, flir cam or the old fashioned way with your tongue.

C4127 would be the best to check vcc main.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks for your answer. Can't I measure with a multimeter? Which components do you recommend to check first if I want to check for a VCC main short?

I am not skilled in this particular area, only a little bit in electronics in general, but I would like to give it a try anyway, thats my only option at this point.

Jon Smith 의 2019년 5월 15일

댓글 달기

iPhone 6s

How to test a water damaged 6S - test points

답변 1개

Update (05/16/2019)

귀하의 답변을 추가하세요