주요 콘텐츠로 건너뛰기

MacBook Air 11"의 2015년 3월 업데이트는 5 세대 Intel Core i5 및 i7 프로세서를 장착하고 배터리 성능이 약간 향상되었습니다.

141 질문 전체 보기

MacBook not turning on anymore and no longer charging.

Last night I accidentally left my phone charging on my laptop overnight while the laptop itself was charging, and when I woke up and tried to turn the computer on, it refused to boot.

I have left it unplugged for a couple hours and when I plug it back in, the LED indicator stays on the solid green light, which leads to me believe it is not charging either.

I have tried resetting the SMC, opening it up and disconnecting the battery, and using a new charger.

If anyone knows of any possible fixes, I would greatly appreciate your help, thanks in advance.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Solid green usually means it’s fully charged on that Mac. Try unplugging the battery and plug in magsafe, the machine should spontaneously boot. If that works, try plugging battery back again, let’s see what happens to start with. Fact that you have had such issue with phone charging should not harm the Mac in any way, possibly just a coincidence.

해당 답변은 도움이 되었습니까?

점수 3

댓글 9개:

If it still doesn't work try turning it on with the trackpad cable disconnected. You may need to remove the battery to disconnect that cable if you have difficulties disconnecting it.

Just tried plugging in magsafe with the battery unplugged, and it still refuses to boot, but the LED is now amber.

Also I have left the computer unplugged for more than 24 hours now and it is still showing green while the battery is plugged in.

Another thing I just noticed is that the SMC reset only works with the battery unplugged, with the battery plugged in it stays green the whole time, but unplugged the LED cycles between amber an green like its supposed to.

Just tried turning it on with the trackpad disconnected, no luck.

Fact that the led is now amber without battery is normal for that logic board. It seems the problem is beyond that and would be inclined to rule out battery, charging and main power lines. Things that may go bad are quite many..try as @benjamen50 suggested disconnecting trackpad cable to rule out that and keyboard possible issues too, that's a good idea. If picture doesn't yet change a logic board in depth diagnostic would be required unfortunately.

Let's give this a try:

Disconnect the battery again and this time press and hold the power button for a good minute then with the battery still disconnected plug in the MagSafe that should do it. If you don't fully discharge the system before plugging in the MagSafe alone it won't reset. Did that work this time?

댓글 4개 더보기

댓글 달기

귀하의 답변을 추가하세요

Brian Balboa 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 120