주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2265 질문 전체 보기

Unable to Activate Shutdown message (BB_CPU?)

Hi,

I have accumulated quite a few iphones 7/7+ which i could not start due to message Unable to Activate Shutdown. Initially I thought it could be BB_CPU problem but usually it happens after attempted Audio IC job and the phone still boot but does not show IMEI/Modem Firmware. In that case I just re-ball BB_CPU.

But the phones at hand with this error message have not been opened before so I am confused. perhaps more experienced micro solderers could shed some light? Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

This sounds like a Qualcomm model. The baseband power management chip has a voltage regulator inside. I think it becomes shorted sending VDD_main voltage into the baseband chip that is why apple had a recall on that model. You could replace the baseband power management chip but the damage has already been done to the baseband ic.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

It is actually Intel version. But nevertheless it is interesting theory. You might be right that at some point BB_PMIC was sending the VDD_MAIN voltage to BB_CPU and damaged it. So even if you replace the BB_PMIC the damage has been done to BB_CPU already.

I tried to re-ball BB_CPU but I am getting the same message/error. That supports your theory. I guess those devices go to 'No Fix' box.

If it’s an Intel version I would take some diode readings around the BB_PMIC I would not declare it a no fix until you are sure it is not just the BB_PMIC which are easily replaceable

댓글 달기

귀하의 답변을 추가하세요

Karolis 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 291