주요 콘텐츠로 건너뛰기

trackpad or clicker not working on my PowerBook 12" G4 al

I just repaired my Powerbook G4 12" 1.5 GHz machine by putting in a new logic board. Everything is working fine but my trackpad is not working. I swapped another top from a machine that I know had a working trackpad. However, after replacing it, it still doesn't work. I checked the connector from the logic board to the upper case and the plug looks like it is connected. Any suggestions? I am using an USB mouse instead of the trackpad at the moment to get around the desktop.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

just changed the upper case again to another upper case and I still am having the same problem.

댓글 달기

답변 1개

선택된 답변

Check the pins on the logic board connector to see if any are bent over and not connecting properly.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Glad I could help solve your problem ;-)

I just checked the pins and they don't seem to be bent. I am assuming that you are referring to the connector that you can pull with the orange thing.

Question, do the other connectors to the left have anything to do with the trackpad. They seem to be connected to their things but as far as I know, there are only three wires on the upper board.

thanks Mayer! I did a little spunger on the pins and moved them slightly. Everything is working now. thanks!

댓글 달기

귀하의 답변을 추가하세요

Yuri 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 13

전체 시간: 1,130