주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1502 질문 전체 보기

USB device not recognized/device malfunctioned.

I first noticed this problem a few days ago when trying to download some pictures of my phone. Every time I plugged it in I got the message "USB device not recognized "so I stopped trying and today my phone died so I plugged it to my wall charger, came back hours later turned it on and it showed low battery and died and when I pluged it into my computer it still showed that message and when I clicked the message it showed that "the device malfunctioned" and that "there are no drivers installed for this device" I thought it was the cable sadly that wasn’t the case some people say it’s the battery but I think it might be the dock connector that’s bad since the device is not being recognized on many computers and with different cables.

Does anyone know whats wrong?Please Help.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 4개

its definitely the phone, its not the cable or the pc/mac, please write something if you've found a solution as i have the same problem and its friving me nuts almost threw the 3gs in the garbage

I have same problem with my Iphone 3gs....... will somebody please tell me how to get out of it....

I am having the sme problem ..My data cable is fine i have checked othere iphones ...

My phone charges fine with the wall charger ...

but it dosent charge via USB on my laptop as it is not recognized ..

i have opened my iphone a few days back and removed the connector that connects to motherboard of the iphone to the dock connector ..i think i have not properly applied it back ...will chk again ..

I have the same issue. I thought I could solve the issue by doing a hard reset- big mistake. Now I can't use my phone and it doesn't detect on the pc. I also tried replacing the dock connector. Unfortunately, I have no solution yet.

댓글 달기

답변 1개

선택된 답변

You said, "but I think it might be the dock connector that’s bad since the device is not being recognized on many computers and with different cables."

Clean the iPhone dock port, carefully blow out any dust and debris. Moisten a lint free cloth with isopropyll alcohol and carefully but thoroughly clean the dock port, especially the pins which are on top of the port mid rib.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Indeed, after months of testing and experimenting I think it is a bad connector problem (on the side of iPhone device); tinkering with the cable and connector sometimes helps; also, at some point: only the original apple cable (short one) works - probably because of contact and cable resistance / impedance

댓글 달기

귀하의 답변을 추가하세요

Sue 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 6

전체 시간: 11,755