해결됨: Samsung SM-T387V Galaxy Tab A digitizer or LCD faulty? - Samsung Android Tablet

Samsung SM-T387V Galaxy Tab A digitizer or LCD faulty?

Can a digitizer be faulty in “dead spots”? Recently replaced the digitizer for a customer and it works perfectly for 7 of the 8 vertical inches. When you get to the bottom row where the back, home and runnings apps virtual buttons appear - that area won’t respond to any touch commands. All else on the digitizer works fine. Or is it a possible underlying LCD issue?

ETA: the virtual buttons for back, home and running apps work fine if the screen is rotated, but that “dead” section still won’t respond to scroll swipes regardless. But at least I have a temp work-around to closing an app, you just have to rotate the screen each time.

게시일: 2019년 7월 12일

옵션

Yes it can. I replaced the screen of an iPhone 7 with a faulty digitizer. The top half worked fine, but the bottom half didn’t work at all. Simply replacing the screen fixed it. It cannot be the lcd. The lcd simply displays visual information. The digitizer is the thin piece of glass that registers analog signals (touch, swipe etc.) and converts it to digital signals which it then sends to the device. A digitizer and lcd are two different things.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

Thanks. Got a new digitizer on order. I pulled the unit back apart and tested everything again and that same section of the digitizer is just dead.

Jim Plosay 의 2019년 7월 12일

You can try a factory reset to test for software issue. Just in case.

John Doe 의 2019년 7월 12일

댓글 달기

Samsung Tablet

Samsung SM-T387V Galaxy Tab A digitizer or LCD faulty?

답변 1개

귀하의 답변을 추가하세요