주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2081 질문 전체 보기

Not charging even with new battery

Hi

A few weeks ago I dropped my iphone 6s in the water, it all worked fine could charge and so. Until a few hours later I couldn’t charge anymore so I thought the battery was dead. I checked this theory by using a volt meter and the pins connected to the battery gave out a good voltage when connected to the power outlet. So I bought a new battery and just replaced the old one. My iphone got back to life however it still won’t charge ?!? even tough the pins gave out a good voltage. Any thing I can try or should I just give up ?

thx

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

2개의 답변

선택된 해법

I think you have done all you can for a water damaged phone unless you want to try a new dock connector. Your phones charging circuit on the logic board will be the problem for now, and then other problems will arise. I would not spend any more time or money on this device.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

yea I guessed so, its just wierd it gives the charging symbol and I get a voltage but it doesn't charge :-(

의 답변

의견 추가하세요
가장 유용한 답변

Have you tried cleaning the the charge hole? I found there gets a lot of dust and crap in a tiny space and the wire won’t connect! Use a needle and try digging around, you’d be surprised

해당 답변은 도움이 되었습니까?

점수 1

댓글:

I have, maybe will try to do it again, however it shows the symbol of charging on the phone and the pins give voltage so I don't think thats the problem ? because ig gives power

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Goldppl 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 22