해결됨: Will not start up, I have replaced power supply and logic board - iMac G5 20" Model A1076

Will not start up, I have replaced power supply and logic board

I have a first gen. G5 Imac 1.8,160 gig HD.1 gig ram. model 2008 ( not year) I have replaced the logic board and power supply. I still have the same problem. Diagnostic lights #1, indicates power, but #2 flashes when pressing power up button. This indicates bad power supply which was replaced with new power supply I purchased at Ifix it. I then bought a new logic board. Still have same diagnostic leds as before. Is there anything else that can cause this?

power up?

게시일: 2011년 7월 18일

옵션

LED 2 indicates that the main logic board has detected proper power from the power supply when the computer is turned on. This LED will be ON when the computer is turned on and the power supply is working correctly.

Put the original logic board back in. Press the reset CUDA button to the left of the diagnostic lights. If the #2 LED still just flashes, check the part number of the replacement power supply to see if it matches. Did you buy this Mac new? You may need to RMA the power supply.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

Thanks for response. Yes, Imac was bought new, it did have meltdown while under warranty. Worked find for next 4 years, then got quirky. Did the cuda button #2 flashed, which caused me to buy new power supply. How do I find if the logic board and power supply match? Are you thinking it still is a power supply problem?

Fred 의 2011년 7월 19일

댓글 달기

iMac G5 20" Model A1076

Will not start up, I have replaced power supply and logic board

답변 1개

귀하의 답변을 추가하세요