주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Issues charging iPhone 6S after replacing battery

I purchased a new battery from iFixit (FTW) and after replacing and letting my battery drain, I started charging it to calibrate the battery. Unfortunately the battery will not charge and stays at 1%. It also restarts on occasion, then I see 100% battery life on the screen and then shuts off. When it restarts, I see 1% battery life on the screen.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

I figured it out. I did not seat my battery connector properly. USER ERROR!

댓글 달기

답변 1개

선택된 답변

Probably got a bad part. This happens from time to time especially with batteries. Luckily, iFixit has a great return policy, so I’d reach out to support and get it replaced.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

No, it was a good part. I did not take my time installing the battery. When I went through and checked my work, I saw I did not place the clip in properly.

Ah, great then. Glad it was an easy fix.

댓글 달기

귀하의 답변을 추가하세요

Saheed Rosenje 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 54