물건을 수리하세요 커뮤니티 상점
수리 커뮤니티 가입 - 계정 만들기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

20 질문 전체 보기 | 65 부품 둘러보기

옵션

No camera functions working

So my colleague replaced the back cover and screen for an iPhone X. By replacing the back cover i mean that we bought a new frame with the back cover already in place. After the replacement the main camera no longer works and the front camera only works sometimes.

I have tried the following:

- Replaced the main camera.

- Replaced the front camera.

- Replaced the flash and on/off button cable.

- Replaced the bluetooth antenna cable.

- Checked all the connectors on the main board and all look fine.

- Did a full reset of the phone 2 times.

All this and nothing worked. I tried turning on the flashlight as well but nothing happened. Any idea what it could be and what to try next?

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터 기준:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I’ve seen this a couple times on an iPhone X, and it seems to be a board defect. When you say you tested the board connectors, did you test voltage on the pins specifically?

이 답변이 도움이 되었나요?

예 아니요
점수 1

댓글 1개:

Thank you for your answer.

So if it's a board defect it means my colleague didn't cause it and it was a coincidence? I mean it's not exactly easy to damage the board by removing it from the case. The iPhone X board don't really have a lot of exposed components.

Never said i testet the board, i just visually checked the connectors. Maybe i should have been more clear about what i meant. Whats the best way to test the voltage? Is there a tool i can use or a multimeter will do?

의

댓글 달기

옵션

Try to put it back in the original back case and when it works you know it is a fault in back case that you bought.

이 답변이 도움이 되었나요?

예 아니요
점수 0

댓글 1개:

Already have. Same result unfortunately.

의

댓글 달기

답변을 추가하세요

Total Repairs AS 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 7

전체 시간: 147