주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

iPhone restarts when HOME button held down, power button unresponsive

I have a donated iPhone 6s, which after many replacement parts has been brought back from the dead (screen, button cable).

I have repaired hundreds of iPhones, and never met a problem that couldn’t be solved by replacing parts.

It works wonderfully, but there are two quirks that I am yet to work out:

  1. The power/sleep button is unresponsive, despite replacing the button cable.
  2. If the HOME button is held down the phone restarts, and sometimes goes into a boot loop.

I have:

  • Replaced the button cable

* reset it

  • wiped it
  • managed to get it into DFU mode (which baffles me, as I thought the power button didn’t work… maybe it works but doesn’t respond correctly?) and updated it

Anyone fancy making any suggestions? It is not HUGELY important, but I am curious as to what might have happened here!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Have you tried using a original power button and not a cheap aftermarket one?

What happens if you unplug the power button does it reboot while holding the home button?

You might also have a bad fpc power button connector on the board!

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Hey there, yes, I always use original Apple parts.

Will try unplugging the power button, good suggestion…

I think the connector is the most likely cause- although no water indicators have been set off I am convinced there has been some kind of ingress- there is residue around the button connector…

Will get get back to you!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

pabz 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 38