기기를 수리하세요 커뮤니티 상점

모델 A1502 / 4MB 공유 L3 캐시 2.6 GHz (Turbo Boost 최대 3.1 GHz) 또는 2.8 GHz (Turbo Boost 최대 3.3 GHz) 듀얼-코어 Intel Core i7 프로세서.

494 질문 전체 보기

옵션

Popped DC-in Board socket off the logic board

MacBook Pro 13” Retina Mid-2014

A1502

Block Image

Block Image

Block Image

I’ve attached images to show what I’ve done.

In troubleshooting my MagSafe board, I pulled up on the board connector rather than out (I should not work on my tech when angry.) Is this something that can be fixed either myself or by a microsolder tech? Or will I have to resort to a logic board replacement?

I can get it to “sit” in the correct position (first photo), but obviously it will not stay

Thank you for your assistance - I can provide any additional details needed.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

That will need to be resoldered back on, the metal legs on the plastic connector is still there so that's good to use.

Any microsoldering technician should be able to that for you.

I did this silly mistake before with a battery connector, forgot to screw battery in so battery flew out with the part.

해당 답변은 도움이 되었습니까?

예 아니요
점수 5

댓글 2개:

Lol, glad to hear I'm not the only one..

의

@benjamen50 - Courtney will need a new connector as the upper pin parts are sheared off. There are two legs per each contact the soldered part and the one above applying pressure. You'll need to find one from a junker board.

의

댓글 달기

귀하의 답변을 추가하세요

Courtney Gelety 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 83