기기를 수리하세요 커뮤니티 상점

Samsung의 주력 휴대폰 Galaxy S8. 2017년 4월 출시.

304 질문 전체 보기

옵션

Help with instaling the back glass adhesive

I purchased the rear cover adhesive from iFixit to replaced the battery. Everything went well until I started the apply the the cover adhesive. I found this step to be very difficult. I am not sure if I did it correctly? Can someone tell me what part of the adhesive stays on the back cover ? Is it ONLY the narrow (sliver) piece that fits around the perimeter ? If so, I found that this sliver of adhesive not to be sticky on BOTH sides . Is there a video online that fully illustrates how this part is installed ? Many thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

See minute 13:40 of this repair video:

Samsung Galaxy S8

https://www.youtube.com/watch?v=pDJLbv7F...

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

Looking at the kit provided by iFixit, I believe you have 3 separate adhesive pieces for the rear cover. Before starting you will need to remove all leftover adhesive for a good seal.

  • The large rectangle piece needs to be attached black side to the frame and/or silver side to the back cover
  • The “U” shaped island adhesive needs to go around the rear camera (should fit visual cues around camera)
  • The last island adhesive piece needs to be attached on the bottom (again should fit visual cues)

The island pieces are black on both sides but will only fit one way. Hope this helps!

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Anthony del Campo 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 61