주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1502 질문 전체 보기

Mute button is sensitive and vibrates occasionally

Hello!

I'm unsure of the error in my iPhone 3GS.

I have a problem with the vibrator, it is very sensitive!

When I gently touch the mute button the phone will vibrate. Squeezing the phone lightly also starts a vibration.

When I have the phone disassembled, I notice that the vibration occurs immediately of the slightest touch back of the "Jack Flex Cable" (where the mute button switch is located). Link to picture at www.ifixit.com...

http://guide-images.ifixit.net/igi/GvUtY...

You see those two gray plops above the red markings? When one touches there lightly it vibrates. The most sensitive spot of them all!!!

After assembled the device again it got even worse and vibrates when ever it feels like.

My question is...

What part needs to be fixed?

Is the vibrating motor over and out? or is it the "Jack Flex Cable" that must be replaced, what do you believe?

Thanks

Krall

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 해법

It looks like mute switch problem. I have similar problem: when mute on, from time to time iPhone start to vibrate. This is because switch is not 'closed' all the times and vibration is the standard signal of activation mute mode. If this is the case switch has to be replaced to the new one.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

So do I need to replace the switch??

댓글 달기

I have the same problem. How did you resolve it?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Krall 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 6,184