기기를 수리하세요 커뮤니티 상점

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2266 질문 전체 보기

옵션

iPhone 7 boot loop caused by the front panel sensor

I started to make a display replacement. I first remove the display assembly ( like photo n° 1)

Block Image

and then I haven’t change the display because I haven’t time so I reassembly it. when I reboot the iPhone, it’s stuck in boot loop. I have read on internet the problem is caused by front camera flex so I have Disconnect the front panel sensor assembly connector from its socket on the logic board (like in photo n°2)

Block Image

and press power on and iPhone it’s turned on. So how I can fix it without change original front facing camera?

just for information all component are original

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

From what you are saying you have an issue from the front camera flex to the camera

inspect the connector for dirt or damage — test

If it isstill faulty

Remove ear speaker —- test

If it is still faulty

replace camera assembly with a know good one — test

It is a step by step procedure to locate what is causing the fault

You know it is OK with the flex cable removed

So start at the connector in which the cable is connected to and work your way back

iPhone 7 Front Camera and Sensor Cable Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 4

댓글 4개:

thank you, the connector seems to be not damaged and I don't know how i can damage other pieces like ear speaker or all the camera if i didn't touch it.

의

I not saying you damaged them They may have gone faulty

의

when i power om the iphone without he front panel sensor assembly connector from its socket on the logic board, it's said i cant use touch id on this device. i'ts possible that home button are faulty too?

의

it is posible does it work has a home button.

의

댓글 달기

귀하의 답변을 추가하세요

2mattdell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 6

전체 시간: 301