기기를 수리하세요 커뮤니티 상점

iPad Air Wi-Fi + Cellular, model no. A1475. Available in Space Gray or Silver, with 16/32/64/128 GB configurations.

125 질문 전체 보기

옵션

My iPad is stuck on "Press Home to upgrade"!

Hello guys! So I need some urgent help with this little problem.

I had set a password for my iPad a while ago, and when I got it again, I couldn’t remember the password at all. As stupid as I am, I tried too many times, and I got the “iPad is disabled, connect to iTunes” screen. I manually installed the firmware for the iPad, and I updated my iPad software through iTunes on my PC. When it was done, I was met with a screen that said “iPad is disabled, try in 60 minutes”. I waited, but then a white screen showed up, and at the bottom, it said “Press Home to Upgrade”. My iPad home button is broken, and AssistiveTouch wouldn’t work either. I tried to connect my iPad to the computer again, but the computer is not recognizing the device.

Have I lost all hope of ever fixing my iPad, or is there still something I can do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

If you want to attempt recovering data / information from the iPad you need to get that home button fixed.

Otherwise you’ll need to manually install the firmware with a DFU restore which will at least let you re-use the iPad like it was new. You can re-enable assistive touch via 3utools with the enable assistive touch option under accessibility. iTunes also allows you to do this too.

해당 답변은 도움이 되었습니까?

예 아니요
점수 4

댓글 2개:

The problem is, the PC cannot recognize the device that has been plugged in. Any suggestions?

의

Yeah you'll need to fix the home button to get past the press home to upgrade option.

Can't really force restart an iPad with a broken home button unless you open up the iPad and disconnect the battery.

의

댓글 달기

귀하의 답변을 추가하세요

Apple Lover 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 47

전체 시간: 1,971