주요 콘텐츠로 건너뛰기

Mac mini가 오랜 기다림 끝에 새로워졌습니다. 프로세서 옵션에는 3.6 GHz quad-core Intel Core i3, 3.0 GHz 6-core Intel Core i5 및 3.2GHz 6-core Intel Core i7 프로세서가 있습니다.

85 질문 전체 보기

Mac mini 20187 64GB Ram Upgrade only showing 32GB!

Hello

i just purchassed a set of 2x 32GB Ram, i have installed the ram on the mac

but in the mac info tab it’s only showing 32GB and only one memory slot used the other one is empty

do you have any idee how to fix this ?

Block Image

Block Image

here’s the the ram i’m using : https://www.amazon.com/DATARAM-2666MHz-P...

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 3개

가장 유용한 답변

While this is a pain to do, you’ll need to remove one of the SO-DIMM’s to see if you can isolate out which SO-DIMM is not working. Then take the working SO-DIMM placing it into the other slot and then test again.

Either one of the SO-DIMM’s is bad or one of your sockets is bad.

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

Does anyone know which how the slots on the board ( A and B) correspond to the slots displayed in the GUI (1 and 2)? I am having the same issue and already swapped once, slot on the left of GUI remains “Empty”.

Block Image

UPDATED GUI left slot = BANK 0/ChannelA-DIMM0 on my machine.

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글 7개:

I would look at the System Report > Memory then expand the memory slots and post a snapshot here for us to see as I trust it more than the GUI.

Thanks for the help Dan. According to system report it's BANK 0/ChannelA-DIMM0

@loader - Did you try swapping the SO-DIMM over from the working side to the other side? to see if its the SO-DIMM you had was bad or the socket.

@danj yes I tried that. Hoping I either messed up and put them back in the same slot OR I did not fully insert the DIMM. It took about 40 mins and before I make a third attempt wanted to fully understand which DIMM the issue was.

@loader - So you have which a bad SO-DIMM or a bad slot?

댓글 2개 더보기

댓글 달기

I had the same problem (didn't recognize one of the aftermarket [Samsung] RAM cards) and tried 'reinstalling' the cards with no luck. As a last effort I tried doing the diagnostic (holding D at startup) which reported no problems - but when it booted up it recognized the other card!!

(it’s at least easier than taking the machine apart again; and also may just be a good idea to do any time you install new RAM to force the machine to recognize it?)

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I love the simple solutions! They are usually the right one.

댓글 달기

귀하의 답변을 추가하세요

fayssal BEL 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 18

전체 시간: 1,276