기기를 수리하세요 커뮤니티 상점

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

267 질문 전체 보기

옵션

Super geniues needed, disabled guy needs PS4 controller modified

He is a super FIFA player, but recently he has problems using the R2 and L2 buttons. It would be totally awesome if we somehow could move the R-L2 next to the R-L1 buttons (side by side), so the R1 button is half the size of the normal button and the other half of the button would be R2, likewize with the L-buttons. Hope it makes sense.

I have tried for hours if not days to figure this out. Hope someone has exeptional skills and can help me help my friend.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

it will be a challenge, Im thinking about 3D printing and doing some adjustment.

Maybe get a spoil controller to tear down to try it out.

doing some soldering to bridge it over. or extend to right... some buttons sure has to be modified.

Dun mind I ask, how much disabled is your friend on... im thinking if can modified to a foot pedal also on one of the button.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Hey Augustine

Thank you for your reply.

Unfortunately he doesn’t have any felling or movements in the legs. He also doesn’t have much strength in his arms anymore, so he has to rest the controller on his legs while gaming, therefore it is impossible for him to use the R-L2.

I have also been thinking about doing some 3D-print, but I don’t have any knowledge about how to do that or make that work, because the when I look at the motherboard in the controller I can figure out how to adjust the buttons.

But again, thanking for your answer, it is highly appreciated.

의

댓글 달기

귀하의 답변을 추가하세요

teddyschou 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 98