주요 콘텐츠로 건너뛰기
수리 커뮤니티 가입 - 계정 만들기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

Battery Changing Heating and Camera issues

I just recently got my phone's battery changed. After that I noticed that battery sometimes drops it's level while on charge for seconds and then it starts to charge again like normal. Also the phone is getting burning hot on mid to top right. The more the processor activity the more it gets hot. Just noticed camera is not showing anything to capture. Opening the camera front/back only shows black screen.

P. S. The service provider removed double tape under battery and didn't put it back in. Instead used some glue solution.

답변되었습니다! 답변 보기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 0
댓글 달기

답변 2개

선택된 해법

From experience it’s very likely that when one of the cameras fail which it’s either the front or back camera as when you see a black screen of both. A lot of the time it is actually one of the cameras that have failed and is causing the other to not work. When one does fail they sometimes cause a short-circuit which causes the phone to heat up at that particular spot and cause rapid battery drain.

A way to get this tested out is to unplug one of the cameras first to rule it out. If still same problem, plug the one you just unplugged back in and unplug the other one. If either camera starts working then you know which camera to get replaced.

Here is a guide for them. My bet it’s the front camera as a lot of time sometimes this gets ripped by mistake because of how short the cable is.

iPhone 6s Plus iSight Camera Replacement

iPhone 6s Plus FaceTime 카메라 및 센서 어셈블리

Edit: orgot to mention this but it can be just one of the cameras not being plugged in fully.

iPhone 6s Plus FaceTime 카메라 및 센서 어셈블리 이미지

안내서

iPhone 6s Plus FaceTime 카메라 및 센서 어셈블리

난이도:

조정

1 - 2 hours

iPhone 6s Plus iSight Camera 이미지

안내서

iPhone 6s Plus iSight Camera Replacement

난이도:

조정

30 minutes - 2 hours

이 답변이 도움이 되었나요?

점수 2

댓글 1개:

The moment the person replaced the battery back cam showed up. Front still dark. Your theory makes

댓글 달기

Gluing the battery is not the problem. During charging apple makes your iPhone to cloud synced. So usually updates and sync happens when charging and connected to wifi. If this happens when you have kept it airplane mode charging, then it is a bit worrying. Post your result.

As far as camera is concerned, if you got DIY stuff remove the camera and attach again.

이 답변이 도움이 되었나요?

점수 0

댓글 2개:

Thanks for addressing the glue thing. What result should I post?

Keep it in airplane mode and charge your iPhone and check for the heating issue.

댓글 달기

답변을 추가하세요

Lawliet L. 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 5

전체 시간: 311