평판: 25
2
So i recently purchased a manta bit set and was wondering if anyone had taken the labelled foam insert from one of the bit sets and made or fit it into another form of case. I do like the case that it comes in, but i’m a tradesman and need something a little more secure/waterproof for example clips and a rubber seal. Thank you to anyone who can help me out!
좋은 질문 입니까?
평판: 1
3
1
This case would fit almost perfectly, and is watertight and sufficiently robust
https://www.amazon.com/Plano-Guide-3600-...
The case the driver set comes in is 216 x 175 x 35 mm, and this Plano one is 280 x 178 x 101 mm
It is slightly oversized for the kit, but you could easily remedy that by placing or gluing in pieces of foam to fill the gaps.
해당 답변은 도움이 되었습니까?
24 시간 전: 1
7일 전: 2
30일 전: 8
전체 시간: 98
