기기를 수리하세요 커뮤니티 상점

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1202 질문 전체 보기

옵션

Two rounded and stripped pentalobes

Hi you all, I have a question. I went ahead and went to do a screen replacement for myself. The problem begun with the pentalobes, i have an ifixit p2 screwdriver, and both of the screws i rounded off and now they are stuck in there. I do have access to the insides, as I went ahead and ripped the screen threads (still somehow working and all, writing from the screen rn) and went ahead thinking I could just get these out with my tweezers and buy different pentalobes to use, but once I had the screen off, i realised the screws wouldn’t get out. Any ideas?

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 1개

I have a late 2016 (A1707) MacBook Pro that has a broken screen I bought a new screen and began disassembly. At step 23, remove antenna screws, 16 x P2, I got 9 out, then the tenth one refused and stripped my P2 bit I had a spare from experience. But it stripped as soon as I tried it now I have a rounded screw in the antenna and can’t get it out putting it back together and using an external monitor for now

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I think about the only thing you can do is drill them out. You might be able to superglue a pentalobe screwdriver onto the ends and see if they will turn. I might suggest getting a chap pentablobe screwdriver online if you go this route. Only other thing I can think of is using vice grips to see if you can twist them out.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Lochy59 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 12

전체 시간: 175