Digitizer Ghost touching after replacing digitizer

Question

iPad 5 LTE

LTE-enabled variant of the fifth generation of iPad, released in March 2017. Available with 32 and 128 GB storage options featuring a 9.7" Retina display and 64-bit A9 processor.

46 질문 전체 보기

Kamil Malec @kamilmalec

평판: 1

게시일: 2020년 2월 18일

옵션

Digitizer Ghost touching after replacing digitizer

i recently replaced my ipad 5 LTE digitizer and it was working fine after the repair but the home button was loose so i figured ill put some glue on the piece that holds it in place and it’ll stick. It fixed my issue but now i have a lot of “ghost touch” on the display.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

Jesse Hooton @hootonberg 평판: 11.4k Mobile Device E.R. 7 5 1 · Answer 1 · 2020-02-18T14:50:54-07:00

Jesse Hooton @hootonberg

평판: 11.4k

Mobile Device E.R.

7

5

1

게시일: 2020년 2월 18일

옵션

Check that there isn’t any pressure applied to the screen around where it’s ghosting. If you had to remove the display to fix the home button issue, you could’ve damaged the digitizer flex cable.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPad 5 LTE

Digitizer Ghost touching after replacing digitizer

답변 1개

귀하의 답변을 추가하세요