주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2073 질문 전체 보기

Taping reball stencil or not

I wanted to get some opinions on taping an integrated circuit to a stencil or not. Are most people using tape and if so what kind is best. I have seen some videos were it seemed they just laid the stencil on the the integrated circuit without taping

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

답변 1개

선택된 해법

It’s entirely up to you and also depends on the size of the IC. If you feel that taping an IC to a stencil is what makes you feel comfortable and holds the IC in place, that’s definitely ok. I personally use Kapton tape (heat resistant tape) . I have done both ways a few times and after you get a hang of it, you just kind of become used to it. It is ideal to tape really small chips that have a decent sized ball grid array to the stencil.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

mikespring1972 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 24