주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2397 질문 전체 보기

Bizarre problem after changing logic board

Hi

Ok do I had a mint condition iPhone 4 which had an activation lock . I changed the board for one in an old iPhone 4 I had which I knew the iCloud details

All went well the phone powered up , I disabled FMI and signed out if iCloud

I then erased all content and settings and to my horror was greeted with the activation lock screen bound still to the iCloud of the logic board I removed ?

How is this possible ? Is there another component aside from the logic board that stores the phones serial number etc ? I'm baffled and have never seen this before in countless others I have done

Any help greatly appreciated

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

No this doesn’t sound possible, unless it was somehow cloned many years ago. The serial and IMEI number are programmed into the CPU of the motherboard. A housing and screen swap can have no influence on the serial number or IMEI number.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I know , I agree with you completely but this is happening. It's 100% got the new board installed in it as I used it for a while with my old iCloud before signing out and resetting the phone . And now it asks for the same email address to activate that was already on it before the logic board was removed - which is sat on my kitchen side !

I still tried my original iCloud to activate even though I had turned it off but to no avail

I'm stumped I have no idea how this could be possible

댓글 달기

귀하의 답변을 추가하세요

Dave Allen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 6

전체 시간: 55