기기를 수리하세요 커뮤니티 상점

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1200 질문 전체 보기

옵션

iPhone X is dead

Hello.

A customer recently came in with he’s iPhone X and explained that it just died. It won’t turn on and it won’t charge.

I tried charging it while using a USB voltage meter and it showed 0A. I suspected the battery and tried to replace it but still no sign of life or charge in the phone. I then connected the phone to a DCPS to check if there is a short in the motherboard but it showed no short at all. I suspect one of the IC’s related to power management is dead but i am not sure where to start.

Anyone with similar issue that has a fix or can tell me what to do next?

Thanks in advance.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Sounds like a board level issue. Send it to a board repair specialist like iPad Rehab or STS Telecom or Louis Rossmann.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I know it's a board level issue. "I suspect one of the IC’s related to power management is dead but i am not sure where to start."

I do board repairs myself but have never seen this issue in an iPhone X. I was hoping i could get someone who has experienced this issue before to tell me where i should star. That way i,m saving time.

의

댓글 달기

옵션

You can check DM readings on the FPC’s to see if anything is off… check voltage readings at battery terminal FPC to see that Tigris and Hydra are doing there job… I have also seen middle layer with separated pads that needed jumpers and others needed a reflow. What does it do on booting from DCPS? does it connect to 3utools (computer)?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Total Repairs AS 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 5

전체 시간: 114