주요 콘텐츠로 건너뛰기

Apple의 MacBook Air 13" 2015년 5월 업데이트에는 5 세대 Intel Core i5 및 i7 프로세서가 성능과 배터리 수명을 약간 향상시켰습니다.

623 질문 전체 보기

Getting pfm006 error, no wifi, no audio, no battery, no keyboard light

Hi,

This is really frustrating, my macbook air early 2015, is working fine one day and next day it flickers and I tried to reset smc but later on it, it was shut down completely.

After showing to Apple store, due to moisture logic board replacement was suggested at almost 80% more expense which is lot on this dummy.

So I shown it to some local apple experts, one has told me that main ic is damaged and somehow it took him 3 months to finally atleast start my laptop but at the cost of wifi, audio, battery, camera and Keyboard lights.

I ran macbook diagnostic and also clicked the picture as attached.

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Can someone suggest or help me please

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

PFM006 is a SMC error.

I don't see this condition would effect your WiFi, Audio, Battery, Camera or keyboard backlights.

This sounds more like something more major happened to your system. Did you have a liquid spill at some point?

At this point I would need to see some pics, you stated you had posted them they are not visible. Review this guide: 기존 질문에 이미지 추가하기

If you hadn’t please take the logic board fully out and take detailed (focused) pics of both sides.

Update (07/13/2020)

Sadly the logic board did get wet and does have a bit of corrosion damage. You’ll need to clean it with a soft toothbrush and 85% or better isopropyl alcohol. Compare with the guides images for the areas that need cleaning.

해당 답변은 도움이 되었습니까?

점수 0

댓글 6개:

Hi,

I just added pictures of logic board.

Please check.

Regards,

Tanish

I think you got it halfway ;-{

You need to click on the toolbox stored image to place the link in your question (edit) so we can see it. Review the guide (Blue URL) I posted.

Hey Dan,

Got it right this time.

I think so.

Tanish

These symptoms can happen if the SMC has been replaced with another from a different board number. Check if they replaced the SMC.

@imicrosoldering - Chris look more closely! Did you find the green corrosion?

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

Tanish 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 172