주요 콘텐츠로 건너뛰기

2017년 9월 22일 출시. Model A1864, A1897. GSM 또는 CDMA / 64 또는 256 GB / 금색, 은색 및 스페이스 그레이.

575 질문 전체 보기

Home button not working at all after screen replacement.

I just replaced the battery and screen. Everything went perfectly fine except for losing two of the screws. Everything works fine except the home button. It’s not that the touch-id won’t work, the button itself doesn’t work at all.

I put the old screen back on and it doesn’t work with the old screen either. I checked for damage and I see no damage (no rips, tears, etc.)

I’ve done this exact work on 3 other phones in the past year and this time was the easiest, yet the only time something didn’t work when I put back together.

Now I’ve got to decide if I want to buy another part (home button) and hope it works… I’ve already spent 130 bucks trying to get this phone nice again to avoid upgrading for 1000… I obviously can’t return the parts since they’re not the problem.

What is wrong, what should I do.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 해법

According to your own diagnostics, unfortuantely it does look like the Home Button Flex is at fault here. It is actually a fairly common problem after replacing the screen.

In my experience I have always found it to be the IC on the Home Button Flex (U10 - Turtle IC) and have replaced a few of these myself although is a difficult repair.

Also, I am sure you are aware, but you cant just replace the home button on these models as both the Home Button and TouchID functions will be gone. You can buy 3rd party buttons such as the JC products, but these will only bring back Home Button functionality, but not TouchID.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

will the home button available here restore home button function (but not touchid)?

@bdt0309 Have never tried them myself, but yes it looks like they do.

thank you for your answers!

댓글 달기

귀하의 답변을 추가하세요

Benjamin Thomas 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 96