기기를 수리하세요 커뮤니티 상점

Pixel 3a XL은 Google의 3세대 저가형 휴대전화의 상위 버전으로, Google의 플래그십과 동일한 카메라를 탑재하고 있습니다. 클리어 화이트, 저스트 블랙 또는 퍼플 색상으로 제공됩니다. 2019년 5월에 출시되었습니다.

15 질문 전체 보기

옵션

Is the pixel 3a volume flex ribbon cable interchangeable with the 3aXL

Hi guys I accidentally purchased the wrong part for my pixel 3aXL… I bought the pixel 3a volume flex ribbon cable instead of the 3aXL. However, the flex cables look very similar…the buttons are in the exact same placement as well as the circle cut pass-through alignment points…there is a slight difference in the cut outs on the sides… but I don't think it should affect fitment. Does anyone know if these are interchangeable?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 해법

옵션

I tried to assemble the pixel 3a volume flex cable and there are a few differences...

It's not quite as wide so it actually doesn't fit into the housing as well. it's incredibly difficult to get the fit for the buttons to work right. Additionally the cable is not quite as long as either, however the buttons do you line up in the right area.

The biggest problem is that the male to female connection from the ribbon cable to the motherboard does not actually lineup and is off by about 2 mm.. if I were to make it fit I would have to make a hard bend to the ribbon cable which I'm sure would damage it.

... So in a pinch I would assume that someone would be able to make it work... but I would definitely feel more comfortable just buying the be part.

Just and FYI for everyone.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기
가장 유용한 답변

옵션

Yes it’s same cable for pixel 3a and 3axl

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 2개:

Thank you David, you rule!

의

Unfortunately David, I tried to assemble the pixel 3a volume flex cable and there are a few differences...

It's not quite as wide so it actually doesn't fit into the housing as well. it's incredibly difficult to get the fit for the buttons to work right. Additionally the cable is not quite as long as either, however the buttons do you line up in the right area.

The biggest problem is that the male to female connection from the ribbon cable to the motherboard does not actually lineup and is off by about 2 mm.. if I were to make it fit I would have to make a hard bend to the ribbon cable which I'm sure would damage it.

... So in a pinch I would assume that someone would be able to make it work... but I would definitely feel more comfortable just buying the be part.

Thank you tho!

의

댓글 달기

귀하의 답변을 추가하세요

Brandon Watkins 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 8

전체 시간: 167