Green/Orange MagSafe, No Boot

Question

MacBook Pro 13" Retina Display Late 2013

모델 A1502 / 2.4, 2.6 또는 2.8 GHz 듀얼-코어 Intel 프로세서 / 2013년 10월 출시

552 질문 전체 보기

Alex Robinson @alexrobinson

평판: 1k

Infinity Tech Repair

5

1

게시일: 2020년 8월 5일

옵션

Green/Orange MagSafe, No Boot

Dear Mac Gods, @mayer and @danj

I have a client with this MacBook Pro, has had intermittent problems booting. SMC reset usually fixes the issue and forces the machine to boot up. Now, no boot up whatsoever and I never had the chance to see the machine while booted.

Here’s what I have tried:

SMC Reset. The MagSafe light turns from Orange, to Green, then back to Orange again after a moment.
PRAM/NVRAM Reset, nothing.
All other known key combos. None of these have even gotten the fan to spin.
I opened the case, unplugged the battery, held the power button for 30 seconds. Also tried SMC reset with no battery or charger.
Plugged charger in without battery. LED is green, then orange after a moment. No boot.
Tried SMC reset and PRAM reset without battery but with charger, nothing.

Doesn’t seem to have any signs of water damage, no blown capacitors or obviously damaged mobo components.

Is there a magic trick I am missing?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

Dan @danj

평판: 479.4k

Self employed contract worker

35

329

971

게시일: 2020년 8월 5일

옵션

At this point I think you’ve proved the logic board is dead.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

The weird part is that the SMC is responsive during resets but still nothing. I'm not sure if there is a way I can test the MagSafe tip with a multimeter but I know it has that digital sense pin which might give me wack numbers since it's not plugged in. If I had a spare charger I wouldn't have to even deal with this though.

Alex Robinson 의 2020년 8월 6일

Ah... You've got your self confused! SMC is independent of the CPU logic.

The fact you see the MagSafe LED alter its state is telling us the SMC is working. The fact the CPU won't respond is telling us the CPU logic has an issue.

The 13" model uses the intergraded graphics logic within the CPU unlike the 15" which has both the intergraded graphics and the discreet GPU as well.

If the system was still responsive I would have run the onboard diagnostics as well as check the battery & charging logic using CoconutBattery.

At this point you'll need to either repair the logic board (if you can) or replace it.

Dan 의 2020년 8월 6일

댓글 달기

The weird part is that the SMC is responsive during resets but still nothing. I'm not sure if there is a way I can test the MagSafe tip with a multimeter but I know it has that digital sense pin which might give me wack numbers since it's not plugged in. If I had a spare charger I wouldn't have to even deal with this though. — Alex Robinson
Ah... You've got your self confused! SMC is independent of the CPU logic.

The fact you see the MagSafe LED alter its state is telling us the SMC is working. The fact the CPU won't respond is telling us the CPU logic has an issue.

The 13" model uses the intergraded graphics logic within the CPU unlike the 15" which has both the intergraded graphics and the discreet GPU as well.

If the system was still responsive I would have run the onboard diagnostics as well as check the battery & charging logic using CoconutBattery.

At this point you'll need to either repair the logic board (if you can) or replace it. — Dan

MacBook Pro 13" Retina Display Late 2013

Green/Orange MagSafe, No Boot

답변 1개

귀하의 답변을 추가하세요