주요 콘텐츠로 건너뛰기

Model A1224 / Mid 2007 및 Early 2008 / 2, 2.4, 또는 2.66 GHz Core 2 Duo 프로세서

549 질문 전체 보기

Why my computer has 9 beeps and the display led doesn’t turn on

i bought a broken imac from 2007 and when i turned it on it make 9 beeps when i opened it i realized that only three leds were lit except the led on the LCD how can i fix this problem?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

1 beep = no RAM installed

2 beeps = incompatible RAM types

3 beeps = no good banks

4 beeps = no good boot images in the boot ROM (and/or bad sys config block)

5 beeps = processor is not usable.

You are most likely hearing a series of 3 beeps a pause then 3 beeps, a pause, then 3 more beeps

Check the RAM modules to make sure that they didn't become dislodged. There is a possibility that the DIM slots are very dusty too. Try blowing out all dust from the computer.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

I already did it but it didn’t work .

Interesting, never knew about the 2, 4 and 5 beeps. I'm assuming the latter is for iMacs where you can replace the processor.

댓글 달기

9 beeps in an SOS pattern (. . . _ _ _ . . .), a pause, then it repeating again usually means the EFI ROM is corrupted and the computer is in EFI ROM recovery mode. Give it a good hour to try and let the computer save itself.

If you think you’ve waited long enough and it still hasn’t done anything, since you have a pre-2011 Mac, you should be able to replace the chip containing the EFI and the EFI ROM. I have no idea where to get one, unfortunately.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Matheus silva nascimento 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 20

전체 시간: 275