주요 콘텐츠로 건너뛰기

2018년 9월 21일 출시. Models A1920, A2097, A2098, A2100. GSM 또는 CDMA / eSIM 또는 nano-SIM / 64, 256, 또는 512GB / 은색, 금색 또는 스페이스 그레이. ("iPhone 10 S"로 발음합니다.)

398 질문 전체 보기

Battery connector gets hot after plugging in new battery

iPhone XS battery replacement. Installed new battery but when plugging it into the board the connector starts to get rapidly warm. Just disconnected and didn’t attempt to boot phone. Was not sure if this was a normal reaction. Have ever noticed it on any other battery repair before.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글 1개:

Does it happen with the old battery also?

댓글 달기

답변 3개

Excess heat is a sign of a short. Inspect the connectors on both to make sure they’re not damaged and then try with the new battery. Why was it initially replaced? I’m assuming because it needed it but would like to confirm that’s the case. Also where did you source your battery from?

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Phone was dropped and wouldnt turn back on or charge. Battery Looked plump so I replaced after opening. Tried amazon battery first and now i fixit battery and still getting hot when connecting

댓글 달기

Phone would not charge or turn on. No water damage. Bought the battery off of amazon. Found article that said iphone x batteries would work with xs

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

they use the same connector but I don't think they are compatible.

댓글 달기

I’m having the same problem. Has anyone found a solution?

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Some context would help here. Why did you replace the battery to begin with.

As the original answer mentions, heat may indicate a short circuit. Is your phone still powering on?

댓글 달기

귀하의 답변을 추가하세요

Jon Roundy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 34

전체 시간: 905