The charging ring fell off my smartwatch.

Question

Fossil Q Marshal Gen 2

Fossil Q Marshal 2세대 스마트워치는 2016년에 출시되었습니다. 주요 기능으로는 GPS, 피트니스, 알림 경보 및 시간을 알 수 있습니다.

15 질문 전체 보기

Geraldine Cheung @inigo_montoya

평판: 13

1

게시일: 2020년 12월 8일

옵션

The charging ring fell off my smartwatch.

I am getting a Fossil Q Explorer Gen 3, and it’s being sold at a low cost because the charging ring has fallen off the back (apparently a common problem with watches that have charging rings).

The ring is still intact and fits into the groove. I don’t know how charging rings work exactly, but is it possible to use hot glue to stick it back in? If so, what glue brands are conductive/ water and sweat proof? Would glue affect the waterproofness or safety of the watch?

And as an additional (possibly stupid) question, could I solder the charging ring back in? Solder is conductive after all and wouldn’t allow the charging ring to come off even if it was covered in sweat. Or would the heat damage the watch body?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 2개

Jero @chefo 평판: 1 · Answer 1 · 2021-03-02T11:15:05-07:00

Jero @chefo

평판: 1

게시일: 2021년 3월 2일

옵션

Have you had it made yet? ? Solved yourself or taken away for repair? I have the same problem.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 1개:

I was told (not by a Fossil rep) that any old superglue would do, so I used loctite. Unfortunately I didn't position the ring correctly, so you need to keep that in mind or else it's never coming back out. Or you can send it back to Fossil and it seems they'll give you a replacement, provided you meet their conditions. Hope that helps.

Geraldine Cheung 의 2021년 5월 5일

댓글 달기