주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1005 질문 전체 보기

iPhone LCD Backplate is stuck preventing access to the insides

Hello all. Today the adhesive holding the screen of my phone to the finally gave up and now my screen is pretty much loose on all sides:

Block Image

Block Image

I’ve had my screen replaced two times (yes I know I’m clumsy) by a third party repair shop so this screen is not an original Apple one.

All I need to do is a simple screen replacement, and a new battery whilst I’m at it as mine is on its final legs, however when I propped up the loose screen to have a look at the internals, I noticed the LCD backplate is blocking the view of the internals.

Block Image

This confused me as in videos there isn’t the LCD Backplate blocking the way and lifting the screen reveals the insides like the battery.

I checked if I could just simply lift it up and move it out the way but it seems like its attatched at these points:

Block Image

Here are two additional photos that may help, note how you can’t see any ‘clips’ on the side of the diplay assembly.

Block Image

Block Image

Anyway, I am pretty confused and don’t know what to do. If you need any additional info feel free to ask me. Worst comes to worst I hold my phone together with rubber bands and hope it lasts until March when I’ll get a new phone.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

The part that still remains on the phone is part of the LCD module. Due to it being a poor quality part they have become seperated so the LCD frame is left on the phone and you have just lifted the LCD itself.

You will be able to lift that frame off just as if you were removing the whole thing. Just get a thin tool underneath the plastic bezel and start lifting from the bottom and work your way up. The clips you highlighted are how the screen is held on so this is completely normal and should come away with some light prying. And also please make sure the 2 pentalobe screws at the bottom of the phone (either side of the charging port) are removed.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

aadam 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 42