주요 콘텐츠로 건너뛰기

모델 M6497 또는 A1005 / 500, 600, 700, 800, 또는 900 MHz G3 processor

117 질문 전체 보기

Will not boot form any drive

Just got this G3. I knew that it might have hard drive issues, so I plugged in my external firewire, and started holding down my option key. I selected the external drive, but when I clicked the arrow, the screen just blinked and nothing happened. The external drive boots other similar macs just fine, so I assume it is not the drive. Also tried several other install CDs, but again the machine will just not boot.

I connected to this mac in target mode from another mac and reformatted the HD and installed 10.3, but when I restarted, I just got a flashing question mark. I read somewhere that it could be corrupt firmware. I am not sure how to fix that. Any ideas would be appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

Please tell me about the machine you are installing from and if your 10.3 is a retail version.

댓글 달기

답변 1개

선택된 답변

Thanks for your interest. I just resolved the issue. Turns out that this G3 500 Mhz only had 64MB of RAM onboard and was not enough to boot into OS X. I added additional memory and the problem was solved.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

studio58 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 607