주요 콘텐츠로 건너뛰기

Ring Video Doorbell Model No. 88RG000FC100

Why is my hardwired battery not trickle charging

I've had my hardwired ring doorbell almost a year a the battery has always been at 100%

Lately its been slowly dropping and not recharging. I've read on other forums that this was the cause of a firmware upgrade and ring knows nothing about it. Their tech support is really terrible. Anyone experiencing this?

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 4
댓글 2개

Same problem. Don't know anything about a firmware upgrade, but after a year or so of staying charged, my Ring Doorbell plus battery depleted. When I checked, it had lost connection to the "solar charger", actually hardwired to a transformer. Rebooting the device and charging the battery restored the electrical connection and battery stayed charged, but gradually lost some charge. Then lost electrical connectivity again. I don't know if this is a problem with the unit, the battery, or the transformer (or a loose connection).

Yes, ours has been doing the same thing. I have taken it off twice in the past month and plugged it in to charge it…within days it is low again.

댓글 달기

답변 3개

가장 유용한 답변

I have the same problem, even change transformer, still not charging or ring internal door bell, connected old transformer to a cord, plugged in power, have 24v out, vired directly to ring, nothing, still not charging. I think ring disabled it so you have to buy theirs solar charger... How is that legal? Maybe time to buy nest door bell...

이 답변이 도움이 되었나요?

점수 1
댓글 달기

If your Ring Video Doorbell is not ringing correctly or is no longer working, use the Ring Video Doorbell Won’t Turn On problem page for possible causes and solutions.

Most likely, this is a faulty battery problem. A Ring Video Doorbell requires at least 3,900 mV. Check the voltage received by the Ring device by opening the Ring app, selecting ‘Ring Pro’, and selecting ‘Device Health.’ If the Device Health page tells you that the Ring is not receiving sufficient voltage, use this Ring support page to make sure that the Ring Pro Power Kit is properly installed.

If your Ring Video Doorbell is plugged in, receiving sufficient voltage, and is not turning on, the device’s battery may be defective. Replace the Ring Doorbell’s battery using this battery replacement guide.

이 답변이 도움이 되었나요?

점수 0

댓글 1개:

I have wireless and we are constantly having to charge. We lowered everything

댓글 달기

I had the same issue.H

However the week that I noticed that the battery was low, I had visitors over and there were a lot ins and out of the door. I disabled all notifications and sure enough battery porcentagem it went up again!

이 답변이 도움이 되었나요?

점수 0
댓글 달기

답변을 추가하세요

carolyndardani 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 11

지난 7일: 94

지난 30일: 402

전체 시간: 17,163